Thanks to racehorseherbal for the instructions.
Liposomal Encapsulation Technology (LET) is an exciting new process that may revolutionize many forms of oral pharmacological therapy and more importantly may be in the realm of the common man to utilize. LET can offer a unique safe way to treat racehorses in a track situation without the use of banned syringes or needles. It is simply an encasing of small volumes of pharmaceutical compounds (herbs, too) by a phospholipid membrane (liposome) allowing safe passage through the gastrointestinal tract without degradation—directly into the blood plasma. It would be the closest thing we have to giving a pill that mimics an intravenous injection! Plus, liposmes could more easily assault and penetrate cell walls and many forms of infective biofilms resulting in a very effective delivery system against these pathological forms. As an example, it has been shown that 5 grams of Vitamin C which has been encased by liposomes is equal in results to 50 grams of Vitamin C that has been given intravenously! It appears that liposomal Vitamin C is far more efficient at permeating tissues than an IV application of Vitamin C. Vitamin C is mostly synthezied in the liver (mammals) or kidneys (reptiles and birds), so it makes sense that if a liposomal Vitamin C vehicle can reach the liver intact where the ascorbic acid is released and the phospholipid liposome is absorbed that it would be a very effective form of protocol. One can go out and purchase expensive Liposomal Vit C and other compounds, but it can be made at home very cheaply. Certainly the home-made Liposomal medications will not be quite as efficiently made as by the big med laboratories, but even if one can produce just 50% liposomal encapsulated material in the kitchen, that is more than good enough for our needs and can offer outstanding health benefits! My book, A Racehorse Herbal will study in detail new and exciting breakthroughs like LET which will more effectively treat the performance horse and will be within the capability of any horseman to process himself! .
Liposomes can be formed mechanically in three ways: 1) extrusion, 2) sonification, 3) microfluridization. The extrusion process forces the raw materials through some type of membrane. The sonification method is what we will be delving into and uses sound waves to stimulate liposomal formation. In this instance, we will use a common ultrasonic cleaner that can be bought just about any where. Lastly, microfluridization is the process the commercial companies seem to prefer and involves expensive equipment. It is more efficient than sonification. They use a microfluidizer to force the raw materials against a forming plate at extremely high pressures to form liposomes. The best liposomes are under 200 nanometers in size having a bilayer membrane. The use either egg or soy lecithin can be the phospholipid source material.
Brooks Bradley has come up with a unique way to produce LET in your do-it-yourself lab or kitchen for pennies. Most of his work has been done with Vitamin C. Vitamin C has very low absorbability in the gastrointestinal tract of humans (16%). By encapsulating Vitamin C with a phospholipid membrane, we could directly by-pass the destructive forces of the gut with Liposomal-C being directly absorbed into the blood stream. He has manipulated the natural tendency of phospholipids to form tiny encasing bubbles (liposomes) in a water-based pharmacological solution. The key is that these formed liposomes will automatically encase whatever is in the water solution with it. Thus, if you have an aqueous solution of Vitamin C, add soy lecithin (a common form of phospholipid easily purchased) and place the two solutions, together in a cheap ultrasonic cleaning unit—you will get an automatic encapsulation via the ultrasonic waves to form Lipsomal-C. This same process could be used for other compounds. Bradley was astounded with the results of Liposmal Vitamin C which even involved stage IV, carcinoma case that had proven unresponsive to all allopathic treatment up unto the LET protocol.
The respected researcher, Brooks Bradley writes,
"The implications are simply staggering. .!
Our vitamin C Liposomal encapsulation protocol is as follows:
Using a small (2 cup) ultrasonic cleaner, like the ones sold at Harbor Freight for around $30.00, we performed the following:
1. Dissolved 3 level tablespoons of soy lecithin in 1 cup (240 ml) of distilled water.
2. Dissolved 1 level tablespoon of ascorbic acid powder (vitamin c) in half a cup (120 ml) of distilled water.
3. Poured both solutions together in the ultrasonic cleaner bowl and turned the unit on. Using a plastic straw (leaving the top of the cleaner open) gently, slowly, stirred the contents. Note: The cleaner will automatically self-stop every 2 minutes. Just push the ON button to continue. Repeat for a total of 3 series or 6 minutes total. By that time the entire solution should be blended into a cloudy, homogeneous, milk-like mixture. The LET solution is now formed.
4. This protocol furnishes about 12 grams (12,000 mg) of vitamin C product at 70% encapsulation efficiency or 8,400 mg of the LET type. This solution will keep at room temperature for 3-4 days. Refrigerated, it will keep much longer. So approximately 43 ml of this final solution should give you approximately 1 gram of Lipo_C.
The homogenizing effect is so powerful that after 3 days at room temperature, no precipitation of solution separation appears evident. This type of sequestered vitamin c has demonstrated to be at least 5 times more effective than any other form of orally ingested vitamin c that we tested. Additionally, it appears to be even more rapid in tissue-bed availability than intravenously applications. An astounding revelation to us!"
More details in formulating liposomal Vitamin C:
Sometimes a meniscus (layer) can form in the completed LET solution. This can occur if the ultrasonic process is not run long enough or too much lecithin has been added in relation to the available ascorbic acid fraction (if one is making Vit C LET). In such case, the meniscus will form on top in minutes after completing the ultrasonic cycle. More commonly, a meniscus will form on the bottom part of the LET solution overnight in some instances. One needs to continually experiment and adjust volumes to achieve the perfect homogenized LET solution that will withstand meniscus layering. Even if this happens, the solution is quite valuable and usable. You will just have a layer of lecithin within the LET solution and that in itself is of medicinal value and should not be discarded. Feed it all!
Lecithin is slow in forming liposomes in aqueous solutions especially when one has not added correct amount ratios of lecithin to the pharmacological solution to be encapsulated. It is often natural to find a gelatinous mass of unencapsulated Lecithin floating on top of your LET solution. The encapsulation process is affected by amount ratios, temperatures of the solutions, and concentrations of the components. One can limit this unencapsulated lecithin layer by increasing the volume of the total water though this has a diluting effect in the combined solution and/or raising the temperature of the solution. Increasing the ultrasonic mixing cycle may also be of value. It should be noted that once the saturation point has been reached in the solution, no amount of adjusting will cause the lecithin to continue to encapsulate. The guiding line for the amateur LET processor is that it is far better to have a layer of unencapsulated lecithin than to produce a solution with too little, no matter how pretty the final solution may look.
Brooks Bradley's simple test to gauge LET efficiency of a liposomal Vitamin C solution:
1) Pour 4 ounces of the finished LET Vitamin C into a 12oz container.
2) Add 1/4 teaspoon of sodium bicarbonate into 1 oz of distilled water, stirring well.
3) Pour the sodium bicarbonate solution into the LET Vitamin C mixture, stirring.
Results: If the resulting foam reaction line from this mixture is .5" or less you will have approximately a 50% encapsulation rate of the raw ascorbic acid nanoparticles. If the foam is 3/8" or less you will have approximately 60% encapsulation. If the foam is 1/8" thick or less, you will have around 75% encapsulation.
Foam occurs when the unencapsulated Vit C reacts with the sodium bicarbonate which is added to produce sodium ascorbate. The liposome encapsulated Vit C will not react. Thus, the less foam, the more Vit C is encapsulated and the more efficient went your process. By the way, this test solution should not be discarded as it is still valuable as a medicinal! The formed sodium ascorbate is a very useable form of Vitamin C.
Further useful tips from DaddyBob and Steve N. of the CS list: For best encapsulation efficiency, blend both the lecithin and your encapsulation solution very well, with a blender, magnetic shaker, or by pure mechanical shaking, until you see no granules or other large debris in solution—then place in the ultrasonic cleaner chamber. At least the use of a common kitchen blender is to be urged for pretreatment of solutions prior to ultrasonic process.
Brooks Bradley writes on this above suggestion:
"First, using some form of blender to enhance/accelerate the process is perfectly acceptable and effective. However, one must understand the limitations of using this modality. To wit: Because the entire encapsulation process is, essentially, a refined homogenization process the researcher is bound within the limits of the chosen process, itself; Using a blender in the early stages of the ultrasonic type protocol, places a limit (especially particle size) on the resultant compounds. As a general rule, the smallest liposomes achievable are going to be larger than 150 nm in size----even after extensive agitating. Therefore, if smaller particles are desired--some procedure must be invoked to achieve this.
Ultrasonic energy is an excellent way to achieve this. Ultrasonic energy applied to solutions having, previously been mixed using mechanical blenders (household type) will improve the encapsulation process greatly (sometimes as much as an order of magnitude) through the immediate size reduction of the encapsulated particle size. Additionally, both power levels and exposure time experienced from the ultrasonic energy have a pronounced effect on the end product: e.g. simply by extending the time exposed to the ultrasonic energy will yield a product with a majority of particles of a markedly reduced physical size (sometimes by more than one-half). Also, by increasing the power spectral density [energy delivered to the target], considerable size and complexity reduction may be achieved (sometimes from larger, multiple-layered liposomes, down to single-layered liposomes of much smaller size). This one characteristic, alone should justify the selection of the larger ultrasonic unit over the smaller one as the larger ultrasonic power level output is much higher. The way to capitalize on this advantage is to limit the depth of the parent solution in the larger ultrasonic unit to 3/4"- 1" deep. Because the distance from the ultrasonic energy source and the mass of the target material DOES, in fact, have a powerful effect on the delivered energy.
Direct visual observation alone will confirm the powerful increase in cavitations (energy field) of the liquid medium. This type of innovation will yield effects that in some cases challenge the results of laboratory-grade, high pressure (over 3000 psi) impact plate systems costing $10,000 and up. What most commercial producers (and labs) do is they RECIRCULATE their candidate solutions in order to achieve smaller and more isolated end products. By extending your exposure time using shallow solutions, do-it-yourselfers can in many cases actually challenge the levels accomplished by these very high dollar commercial machines using their own do-it-yourself homemade systems.
Someone asked the question: does pre-agitation via kitchen blending devices damage or compromise the candidate solutions. The short answer is NO. Almost any type of agitation, aids in the homogenization process."
Vitamin C is the most used supplement in the world. There is good reason for this as the science behind the many benefits of vitamin C is solid. Dr. Svent Gyorgi and Dr. Linus Pauling performed innumerable experiments proving that man, unlike most animals, is dependent upon vitamin C for a healthy existence. For decades we have relied upon various ascorbic formulas for our supplemental needs, but now a whole new vista opens up with Liposomal technology.
Increase Absorption Dramatically - Regular vitamin C is absorbed at approximately 19%, the balance remains in the gastrointestinal tract to attract water and loosen the bowels. Nanotechnology, liposomalized vitamin C is absorbed at 93%, measurable in the blood stream. A 390% increase in absorption! Get IV results with oral dosage!
Another Excellent Recipe is Shown Here:
This recipe will give you a product between 7.0 and 7.5 (measured with Alkalive pH Stix) or similar pH to human blood so there is no risk of over acidifying your blood should you take significant amounts of your homemade Liposomal Vitamin C Ascorbate.
(Blood pH is tightly controlled by the body at near 7.35 pH. If your blood pH were much above or below that number you would be a very sick person.)
Creating an identical pH in your liposomal brew is simply a matter of carefully adjusting the level of bicarbonate of soda.
This Vitamin C Ascorbate recipe is a compilation of several postings on forums and Pdazzler’s own trials in the kitchen.
Using a small (2 cup) Ultrasonic cleaner, (Item #03305, obtainable from Harbor Freight @ about $30.00), we performed the following:
1. In qt mixing jar pour 1 cup of distilled water. Add 3 level
Then place the lecithin mixture in the refrigerator for two or more hours. (You can leave in refrigerator overnight if you prefer.) This allows lecithin granules to soak up water for easy mixing into solution.
Note: Mixing can be accomplished easier if you raise the temperature of the distilled water being used to 45 degrees Celsius (113 degrees Fahrenheit). I have found this unnecessary in getting high quality mixtures but others have found this warmer temperature helpful.
After 2 hour soaking period vigorously agitate the mixture for another 3 – 5 minutes. At the conclusion there should be no lecithin granules visible. Set this smooth lecithin mixture aside.
2. Dissolved 1 level Tablespoon of Pharmaceutical grade Vitamin C powder in 2 oz. of distilled water. We recommend you use a 6 oz. or larger screw lid jar so you can shake vigorously.
3. Dissolve 1 Heaping Tablespoon of Bob’s Red Mill Bicarbonate of Soda (Bob’s is Aluminum free) in 2 oz. of distilled water using a separate 6 oz. or larger screw lid jar. Shake or agitate the mixture 3 minutes or until soda dissolved.
*One mole of sodium bicarbonate is 84 grams, and one mole of ascorbic acid is 176 grams. So, the correct (stoichiometric) ratio of sodium bicarbonate to ascorbic acid is 84/176 = 0.477. For example, it would take 477 milligrams of sodium bicarbonate to neutralize 1000 milligrams of ascorbic acid.
**What follows is often the most difficult part of the process for those new to making homemade liposomal Vitamin C Ascorbate.
While stirring the Vitamin C / distilled water solution very slowly pour/dribble the dissolved bicarbonate of soda/water mixture into the Vitamin C / distilled water solution. (Pour soda solution very slowly as the resulting mixture will bubble. By pouring slowing and constantly stirring you will be able to mix the two without bubbling over.)
At the conclusion of mixing the bicarbonate of soda mixture into the Vitamin C mixture all bubbling will cease. If you have any soda settled in the jar pour the resulting total mix together into that jar, swirl and pour the resulting Vitamin C / Bicarbonate of Soda mixture into the Ultrasonic Cleaner.
4. Pour the Lecithin solution into ultrasonic cleaner bowl with the Vitamin C / Bicarbonate of Soda mixture and stir the contents together.
5. Turn the ultrasonic cleaner on and using a plastic straw (leaving the top of the cleaner opened), gently, slowly, stirred the contents.
Note: The cleaner will, automatically, self-stop about every 2 minutes. Just push ON button to continue. Repeat for a total of 6 series (12 – 18 minutes). By that time the entire solution should be blended into a cloudy, homogeneous, milk-like mixture. The LET solution is now well formed.
You can raise the level of encapsulation by continuing several more ultrasonic cycles if desired.
This protocol furnishes 12 grams (12000mg.) of Vitamin C Ascorbate. At 70% – 90% encapsulation efficiency, 8400 mg would be of the LET type. This solution will keep, acceptably, at room temperature for 3 to 4 days. Refrigerated, it will keep much longer.